panasonic Z5 Chassis Repair Tips
Search: Z5 Chassis panasonic
Results 8
Results 8
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Panasonic | Z5 Chassis | Trips at sw on after initial rush of EHT with LED flashing | Prot sw Q502/3 activated cutting off line drive; short out C507 to disable trip; set now operates; R525 300k ½w o/c | ||
Panasonic | Z5 Chassis | Tripping with HT low | C823 10nF 500v in snubber cct leaky | ||
Panasonic | Z5 Chassis | No signals | 4Mhz Xtal in tuner dry joints or not soldered; (30v line is the tuning volts & MB is 11v supply) | ||
Panasonic | Z5 Chassis | LED flashes & PSU whistles | R821 330k in trip cct o/c | ||
Panasonic | Z5 Chassis | Lack of height with top foldover | 30v supply low due to R521 8R2 hi res | ||
Panasonic | Z5 Chassis | Dead - no psu activity | STR51424 chopper chip had internal s/c between pins 2 & 4 | ||
Panasonic | Z5 Chassis | Dead | IC801 overheating - D806 AU02V0 leaky | ||
Panasonic | Z5 Chassis | A look at the Panasonic Z5 Circuit | See TV Mag Aug - Oct 1996 |